Salto Systems: XS4

From its beginning in 2001, SALTO has had one objective: to create an industry leading access control system that is both simple to use and highly efficient. SALTO systems gives users the ability to control their access needs and secure all points of entry without complex and costly wiring build-outs. Their solutions are simple to install, cost-effective, and designed to be future-proof. SALTO’s SVN platform was the result–the world’s first stand-alone, battery powered electronic locks for access control systems.
————————————————————————————————————————————————-
Since then, SALTO has continued to introduce innovations with a major impact on electronic security. With both online and real-time technology, SALTO’s XS4 access control platform augments the security of any building environment through securing nearly any door and allowing the monitoring and control of every user. These systems are networked wirelessly to enable integration with existing systems without running a new backbone through the facility.
————————————————————————————————————————————————-
The SALTO Virtual Network (SVN) is the back-end of wireless connection which allows and access control system to grow from just a small number of doors and users to beyond, seamlessly. Locks can read, receive and write through an encrypted data-on-card system through RFID. A smartcard is used for user authentication.
————————————————————————————————————————————————-
When the card is presented even to an off-line door, access control is maintained and the door also writes data such as blacklist information and battery status onto the card. This smartcard can then transmit this information to a server through online wall readers which can receive information from these cards at any location on-site.
————————————————————————————————————————————————-
Here is a breakdown of the access control chain when the smartcard interacts with the wall reader:
————————————————————————————————————————————————-
-A user access event occurs, the card transmits to the system via wall reader.
————————————————————————————————————————————————-
-Wall reader now transmits back to the card: This includes deleted card list, updated user access rights, and expiry date renovation.
————————————————————————————————————————————————-
-Through the server the following functions can be performed: Users added or deleted remotely, User profiles updated, event audit trail created, device battery report initiated.
————————————————————————————————————————————————-
In review, the benefit of a SALTO lock is in their ability to affordably and quickly be integrated into an access control environment with rapid ability to scale. The locks, wall readers, and smartcards can communicate wirelessly and securely, and there is no need to endure the costly and time-consuming process of drilling, running, and testing wires. These locks are used across all access control environments, from schools and hospitals to businesses and government sites.
————————————————————————————————————————————————-

Security Technology of South Texas is an authorized integrator for many surveillance and access control manufacturers and has designed systems with this kind of functionality.

————————————————————————————————————————————————–

Please contact us at

admin@gostst.com on our website


or via phone at  210-446-4863   24/7

Methods for Enhancing Building Access Control

Whether you have a building that has successfully used the same access control protocols for years or one that needs change, this coming quarter of 2019 is a good time to consider reassessing the system and procedures you use. Critically, if you are not using any form of access control, consider adding it as part of your security plan sooner rather than later.

Having a solid access control system and policies in place will help keep your occupants, assets, and property safe by ensuring secure access for the right people to the right segments of your property.

Sitting next to surveillance and maintaining a human presence on-site, a system of electronic access control completes a triad of safety, and will be designed to take into account the design of the building, any complementary security systems, and training for those who will use it. Following are three things to think about when working with a security integrator to design and implement electronic access control on your properties.

 

1. Setting Access Levels

Borrowing a page from the “Zero-Trust” doctrine of info-sec administrators, it is important to think with the mind of the potential aggressors you are implementing the system to protect yourself against. There will be people who simply do not need access to all levels of a building, and before deciding who should have what level of access, the building itself should be examined to determine points of exposure.

It can be useful to take a map of the structure and break it down into zones of different colors according to the access or security level needed. Then you can decide who can have access and associate time and date restrictions to those identities.

It will generally make sense for the majority of employees to enter and exit through a single point of entry, so as to more easily monitor who is in and out of the building. From there, branch out and look at the rooms inside. Set a protocol in place to make sure everyone has the right level of access for their needs, but nothing more. Modern systems will create a “digital fingerprint” for each person granted access, able to track their movements and any times they accessed specific areas.

 

2. Audit Access

A common trap to fall into is an over-issuing of key fobs or cards over time. As people report losing cards or forget them, it is often simplest to issue another right then and there. Of course, this creates significant security concerns overtime with duplicate access cards potentially being available for malicious use. To manage this, facility admins must either audit the system regularly or set automatic time-out features to the cards.

 

These features could include:

-Access denied if the card has not been used within a set amount of time

-Self-expiration of the card

-The direct connection of the card to a database that will be managed personally or by an administrator

 

In the event that third-party employees require access, a separate database can be created. Using a specific search term for these contractors will differentiate them within the database.

 

3. Perform Periodic Testing and Protocol Assurance

Just like any other electronic system, regular testing and updating of drivers is necessary. Security flaws are repaired through patches by the vendor, and if you fail to update, the potential for threat actors to take advantage of that failure exists.

Furthermore, without the assurance of procedures and protocols surrounding the use of these systems, their value is greatly reduced. For instance, a simple but popular method of building intrusion called “tailgating” relies upon our social tendency towards politeness over security assurance. In this attack, the threat actor simply follows closely behind someone accessing the building and relies on them holding the door for them.

This is actually one of the most difficult to control threats to an access control system due to its simplicity and zero-tech approach. Having multiple layers of security, man-traps, and other fail-safes massively reduces the success rate of “tailgating”. Protocol should assume anyone who cannot present a card or other provided identifier to be a potential threat.

 

Security Technology of South Texas is happy to offer
custom access control and surveillance solutions to the
business security market, designed either turn-key and from the ground up,
or integrated into an already existing series of cameras and access control
structures.

Please contact us through email at admin@gostst.com

or by phone at 210-446-4863 24/7 to schedule a consultation.

GV-VD8700 “Face”

The VD8700 8MP face recognition analytic camera, recently released by Geovision, a world leader in surveillance, features on-board analytics as well as a facial recognition program. The device is able to capture faces and store those images to allow it to initiate alerts to the user if a certain person enters its view.

Geovision’s GV-VD8700  is a ‘Vandal Proof’ IP Dome camera featuring industry leading face recognition technology. Unlike some off-the-shelf solutions, this device features not only person/vehicle detection modes with analytics capabilities, but the power to identify personnel from a database. Up to 10,000 face profiles can be defined in the camera’s database. This database can also be categorized to meet various other needs in the corporate environment, including facilitating customer service, security management and more.

This camera’s facial recognition mechanism is effective within a relatively short distance of 4 meters, and is meant to be used in points of entrance to a facility, but it is able to detect up to 10 faces at a time. A recognition time of just 2 seconds allows quick identification of both VIP guests and potential intruders. Integrated with Geovision’s GV-VMS, this IP camera can also be used to trigger alerts based upon predefined rules, providing improved and reliable security management.

In its outdoor version, the camera features IK10 vandal resistance with IP66 ingress protection. In order to  achieve a better compression ratio while still maintaining high-quality imaging at reduced network bandwidths, the camera supports the H.265 video codec. If intended to be used for night operations, this version of the camera is equipped with an IR effective distance of up to 40 meters. Wide Dynamic Range and Backlight Compensation allow the camera to detect faces in environments with drastic light contrast.

It is able to pan, tilt, and rotate on a 3-axis mechanism; pan 0-350 degrees, tilt 0-75, and rotate 0-340 degrees. It runs on Windows 10 and has support for mobile device access for iOS and Android. Storage is at 2GB for RAM, and 8GB for ROM. The camera can run stand-alone or connected to a Video Management Software (VMS).

Facial recognition and analytics gives an existing system a new edge. Large retail chains use this technology to identify shoplifters, capturing their face when they steal the first time, so that security can be alerted immediately to any time that individual returns. It could also be used on a door, front porch, or any place where you might want to know if a specific person is coming to, and if so, whether you would like to receive an immediate alert about it.

 

To learn more about how facial recognition cameras can help protect your commercial facility, please contact Security Technology of South Texas, Inc. at 210-446-4863 or through the website form: www.securitytechnologyofsouthtexas.com/contact-us

 

Learning to Leverage Biometrics in Access Control Environments

The biometrics ecosystem is evolving at a rapid pace and providing incredible benefits to enterprises that adopt the technology, especially when these now-commonplace features are applied for cybersecurity.

Although people are already familiar with using a thumbprint or facial recognition to unlock their mobile device or complete an online purchase with it, the real power of biometrics extends far beyond these simple features and experiences.

As massive data breaches spilling millions of user passwords and shared secrets become a familiar part of our everyday lives, so does the reality of malicious hackers leveraging these credentials to cause widespread damage. Due to the sheer number of compromised user credentials available from these spills identity theft is at an all-time high, potential GDPR fines loom over many organizations, and there is an atmosphere of distrust.

This is where biometrics can provide an answer because these features we rely on for convenience can also have a groundbreaking impact on security and privacy. Providing that we follow a hard and fast rule — that biometrics are combined with public-key cryptography.

In order to properly leverage biometrics, however, IT and security teams should first understand the key elements that make it such a powerful tool to combat today’s ever-evolving threat landscape and, how to begin implementing it without requiring a complete overhaul of security infrastructure.

The Biometrics Ecosystem

One of the most powerful aspects of the biometrics ecosystem as it relates to cybersecurity is that it replaces the shared “something you know” factor of user authentication with the difficult to reproduce “something you are” factor. Whereas passwords and shared secrets can be stolen and duplicated, every person’s biometrics are completely unique.

In turn the devices that match biometrics to their enrolled templates have grown in sophistication and are already in our hands. The vast majority of sensors on modern mobile devices have a 1/50,000 minimum false acceptance rate (FAR) which makes it extremely difficult to mimic a biometric template.

Using these sensors paired with standards-based authentication such as Fast IDentity Online (FIDO) protocols that eliminates shared secrets creates significant friction for the bad actors who weaponize credentials for fraud through account takeover. It also disrupts a hacker’s attack vector (and thus their economic model) as they can no longer focus on huge server stockpiles of user credentials and must instead go to individual devices to attempt to obtain a single user’s credentials.

This shift makes it virtually impossible to have the mass credential breaches like the ones we are experiencing on an almost daily basis today.

Select a Use Case and a Secure Model

When launching a biometrics strategy, IT and security teams should look for areas where biometrics can have the greatest effect while creating the least amount of friction, and begin deploying the capabilities there. Oftentimes this is with internal facing applications that don’t directly impact customers. Or, they can take the route of securing consumer-facing apps since biometrics are so popular with their users and consumer devices with advanced capabilities are readily available.

Even the most forward-thinking organizations can balk at biometrics when they think it requires an unmanageable set of changes, such as the addition of special hardware, gutting of associated solutions or the taking on of unacceptable kinds of risk such as custodianship of biometrics.

However, the best way to implement biometrics into the security framework is through a deliberate and gradual process using a solution that is built upon mobile-centric FIDO standards. FIDO-based solutions are built to play nicely with security products already in place, and the strength of the standard ensures that users — not the enterprise — are the stewards of biometrics.

Make User Experience A Top Priority

Finally, despite all of the security benefits the biometrics ecosystem provides, if the user experience is clunky it will be difficult for users to adopt. The good news is that providing an easy-to-use, uniform experience for biometrics is rather simple due to the sophistication of today’s mobile devices. Every employee already has a company or personal smartphone and experience using biometrics to unlock the phone make a payment.

The biometrics ecosystem provides incredible opportunity to create a more secure online world while building upon the experience smartphones have proven to deliver their users. Enterprises that want to roll out biometrics-based services today are poised to fully capitalize on it.

Thanks to the sophistication and ubiquity of the devices, and to the availability of solutions built upon open standards-based decentralized architectures, migrating to a true password-less state is within reach. Once it’s deployed — even on a limited basis — my guess is that the enterprise will begin to see other areas for implementation across the enterprise.

 

Security Technology of South Texas is an authorized integrator for many surveillance and access control manufacturers and has designed systems with this kind of functionality. Biometrics is particularly useful in enterprise scale operations, various campuses, as well as car dealerships or any other large property where tight security is necessary.

Please contact us at  admin@gostst.com on our website
or via phone at  210-446-4863   24/7